A diaphragm seal system in vacuum pressure process must master a major challenge ? it must deliver a reliable measuring result, even though the pressure drops and the temperature rises at the same time. The exemplory case of a chemical company producing phthalic anhydride (PA) shows that it is by no means self-evident that this requirement could be met on a consistent basis.
Enormous is primarily used as a plasticiser for plastics. However, additionally it is found in the production of synthetic resins and dyes. The plant operator obtains this compound via the catalytic oxidation of o-xylene in the gas phase, followed by a vacuum distillation process.
Critical phase for pressure measurement
In this technique, the critical phase for pressure measurement occurs in the distillation column. There, the procedure temperature can rise to more than 230 �C while the pressure drops to 100 mbar abs. With such a contrary action, the traditional installed measurement technology reaches its performance limit relatively quickly, which the aforementioned manufacturer was forced to find out ? all instrumentation showed a measurement deviation beyond your defined tolerance after only week or two.
Diaphragm seal system adapted in all elements to the vacuum process
The diaphragm seal system is tailored exactly to the conditions of the vacuum process and tested under application conditions.
Consequently, the company approached WIKA with the obtain a measuring solution that would also fulfil its task with the mandatory accuracy in the long run beneath the conditions described. WIKA then drew on its in-depth expertise to design a diaphragm seal system for the vacuum process, comprising a process transmitter (model IPT-20), a flange-type diaphragm seal with flush diaphragm (model 990.27) and a capillary.
All components of this measuring system were selected designed for the application form. Silicone oil KN32 was therefore selected because the fill fluid for pressure transmission. The cleaning and conditioning of the diaphragm seal, the capillary, the bond pieces plus the automated filling process were also matched to each other exactly. With sensitive limit ranges, even one drop of liquid too much or inadequate can destabilise the volume balance of the diaphragm seal system and therefore impair its function. Subsequently, correct measurement would no more be guaranteed.
Test under application conditions
After cleaning, all elements of the diaphragm seal system were first fully welded right into a single unit as usual, accompanied by the filling and adjustment of the machine. Before delivery, however, there was another crucial step ? in its laboratory, WIKA simulated vacuum pressure process for the diaphragm seal system in accordance with the customer?s conditions and subjected it to a thermal ageing process. This test confirmed the procedure suitability of the measuring system.
Note
More info on the WIKA diaphragm seal systems are available on the WIKA website. When you have any questions, your contact will gladly assist you to.
Also read our posts
Diaphragm seals for stable flow measurement in deep seas
How do diaphragm seals work?
Watch the following video to learn more concerning the functionality, application areas and advantages of diaphragm seals: